FGT
Submersible shredder pump for sewage
Submersible shredder pump for sewage that is widely used for lifting civil and industrial wastes, slaughterhouses, stables and sewers.
- Description
- Request information about this product
- Documentación del producto
Description
Description
- Submersible shredder pump for sewage that is widely used for lifting civil and industrial wastes, slaughterhouses, stables and sewers.
- It is equipped with an innovative shredding system that allows cutting the solid parts and pumping them with the liquid, ensuring the cleaning of the pipeline.
- Any material that cannot pass through the shredder due to its dimensions is rejected from the shredder itself.
- Not suitable for lifting combustible fluids. It is also forbidden to position or to remove the pump by means of the electric cable.
¡Take a closer look at our other submersible pumps!
Materials
| Pump casing | GG-20 cast iron |
| Impeller | GG-20 cast iron |
| Motor casing | GG-20 cast iron |
| Motor-pump shaft | 416 SS |
| Mechanical seal | Ceramic/graphite |
| Gaskets | Nitrile rubber |
Technical data
| Motor | Single-phase or three-phase depending on the model |
| Tension | Single-phase 230 V ± 5% Three-phase 230/400 V ± 5% |
| Poles | 2 |
| Level of protection | IP68 |
| Insulation | F Class |
Usage limits
| Range of flow rates | Up to 280 l/min depending on the model |
| Range of pressures | Up to 2,6 bar depending on the model |
| Max. Working pressure | 4 bar |
| Max. Working temperature (continuous duty) | 60ºC |
| Max. Working temperature (intermittent duty) | Up to 90ºC |
| Minimum pumping level | 10 cm above the pump casing |
| Maximum flui density | Not exceeding 1100 kg/m3 |
