CHIPER
Submersible sewage pump
Submersible sewage pump that is widely used in crafts and industry to evacuate clean or dirty water or other liquids.
The unit can lift fluids from rainwater storage tanks or traps, from basements, for drying subways or other uses.
- Description
- Request information about this product
- TECHNICAL RESOURCES
Description
Description
- Submersible sewage pump that is widely used in crafts and industry to evacuate clean or dirty water or other liquids. The unit can lift fluids from rainwater storage tanks or traps, from basements, for drying subways or other uses.
- Equipped with an opened vortex impeller (VRX) or a double-channel opened impeller (BC), depending on the model.
- The components have been precisely selected for maximum reliability and long service life even in the toughest applications.
- Not suitable for lifting combustible fluids. It is also forbidden to position or to remove the pump by means of the electric cable.
¡Take a closer look at our other submersible pumps!
Materials
| Pump casing | GG-20 cast iron |
| Impeller | GG-20 cast iron |
| Motor casing | GG-20 cast iron |
| Motor-pump shaft | 416 SS |
| Mechanical seal | Silicon carbide/alumina |
| Gaskets | Nitrile rubber |
Technical data
| Motor | Single-phase or three-phase depending on the model |
| Tension | Single-phase 230 V ± 5% up to 2 HP Three-phase 230/400 V ± 5% up to 5,5 HP |
| Poles | 2 |
| Level of protection | IP68 |
| Insulation | F Class |
Usage limits
| Range of flow rates | Up to 975 l/min depending on the model |
| Range of pressures | Up to 1,9 bar depending on the model |
| Max. Working pressure | 4 bar |
| Max. Working temperature (continuous duty) | 60ºC |
| Max. Working temperature (intermittent duty) | Up to 90ºC |
| Minimum pumping level | 10 cm above the pump casing |
| Maximum flui density | Not exceeding 1100 kg/m3 |
